我国水路运输碳排放现状及减碳路径分析

本文在阐述我国水路运输碳排放现状的基础上,分析了水路运输减少碳排放过程中存在的主要问题,提出了水路运输减碳主要路径和政策建议,为相关部门开展碳减排工作提供参考。     

3洞小净距隧道围岩压力计算方法

针对3洞小净距隧道围岩压力计算问题,基于普氏平衡拱理论,将围岩压力看作单洞隧道的基本压力与相邻隧道开挖引起的附加压力之和,提出适用于3洞小净距隧道的围岩压力计算方法;根据该计算方法研究不同岩柱厚度、开挖跨度和开挖高度对围岩压力的影响规律,并将该计算方法应用于确定八达岭长城站3洞小净距隧道围岩压力。结果表明:随着岩柱厚度的增加,围岩压力不断减小,当岩柱厚度达到某一值时,围岩压力与单洞隧道相同;岩柱厚度、边洞跨度和中洞高度变化影响整体围岩压力,中洞跨度和边洞高度仅影响各自单洞围岩压力;3洞小净距隧道的最优开挖顺序为"先边洞、后中洞",中洞围岩压力大于边洞,应力值最大点为中洞顶部。施工中应注意中洞围岩稳定,采取有效的措施对岩柱区域进行加固。     

深海超高压环境模拟容器裂纹评定

深海超高压环境模拟容器用于模拟水下压力环境,其容器壁上承受反复载荷,容易产生疲劳裂纹.疲劳裂纹扩展是影响其断裂的主要因素.本文旨在分析半椭圆裂纹在老化的深海超高压环境模拟容器中的扩展行为,评估容器的安全性,因此对材料20MnMoNb钢的裂纹扩展特性进行了试验研究,首先考虑三角形和梯形加载情况,通过比较两组实验结果,考察了其材料对保载时间的敏感性.采用基于统一的裂纹扩展率模型的三维有限元方法进行了疲劳裂纹扩展计算,并通过CT试样的一组数值和实验结果进行了验证,最后建立了不同初始尺寸、展弦比和倾角的裂纹有限元模型,并根据裂纹在容器内壁的容许深度准则,计算了容器的剩余寿命.其分析结果可为深海超高压环境模拟容器可靠性评估提供参考.     

Structural safety assessment procedure for membrane-type LNG CCS considering hydroelasticity effect

As environmental regulations have become more onerous, the demand for LNG and LNG carriers has increased. The LNG cargo containment system (LNG CCS) is one of the most important facilities in LNG carriers, and many membrane types of LNG CCS have been developed so far. Traditionally, sloshing model tests are performed and a series of statistical approaches are used to obtain design sloshing pressures. Then, these design loads are utilized to analyze the structural safety of LNG CCS. In the sloshing model test, the flat and almost rigid plate is used as the LNG CCS instead of a real model, and thus, the hydroelasticity effect cannot be considered. In the present research, the effect of hydroelasticity on sloshing pressure was investigated in a fluid-structure interaction simulation. A wet drop simulation was conducted, and its results subsequently were compared with wet drop experimental test results to ensure their validity. Then, two types of structure model, namely a flat-rigid plate model and a flat-flexible CCS model, were generated to investigate the effect of hydroelasticity. Also, a fluid hitting analysis model was devised to realize the sloshing phenomenon, and the two generated structure models were applied as the structure domain in the analysis. In the fluid hitting simulations, it was found that the hydroelasticity effect on sloshing pressure is significant. Thus, correction factors, which are quantitative values of the effect of hydroelasticity, were derived (and are proposed herein). Finally, a structural safety assessment procedure for consideration of the hydroelasticity effect was derived (and is suggested herein).     

25t轴重荷载作用下隧底脱空区域受力特性分析

为了研究在役铁路隧道在通车之后隧底脱空病害的问题,采用有限元理论,建立隧道脱空区域在围岩压力与25 t轴重列车动载作用下的数值计算模型,主要研究80 cm与40 cm脱空宽度分别距隧道中心线0,80 cm与160 cm时脱空区域的受力特性。结果表明:在围岩压力下,脱空区域中线上壁和外侧顶角混凝土中产生拉应力及内侧顶角中产生压应力,其中压应力对脱空的宽度更为敏感;同时施加列车动载作用时,脱空区域上壁出现了竖向动应力与横向拉应力,得到了脱空区域力学指标的最大响应值及其出现的具体位置,宽度的增加对脱空区上壁横向拉应力更为显著,上壁横向拉应力增幅超过200%,竖向动应力增幅达50%。因此,隧底脱空区周围应力分布复杂,拉应力与压应力在脱空区域同时存在,应力突变严重,对脱空现象应及时组织处理。     

某船右主机不能正常建立滑油压力的故障排除

文章对某船右主机启动过程中,机带滑油泵不能正常建立滑油压力进行了分析,制定了针对性的排除故障措施,通过在机带滑油泵通舱管吸入口处安装吸入止回阀解决了滑油压力非正常下降的故障,实船应用证明措施合理,对同类故障排除有较好的借鉴意义。     

Benefit of speed reduction for ships in different weather conditions

Currently, the shipping industry is facing a great challenge of reducing emissions. Reducing ship speeds will reduce the emissions in the immediate future with no additional infrastructure. However, a detailed investigation is required to verify the claim that a 10% speed reduction would lead to 19% fuel savings (Faber et al., 2012).This paper investigates fuel savings due to speed reduction using detailed modeling of ship performance. Three container ships, two bulk carriers, and one tanker, representative of the shipping fleet, have been designed. Voyages have been simulated by modeling calm water resistance, wave resistance, propulsion efficiency, and engine limits. Six ships have been simulated in various weather conditions at different speeds. Potential fuel savings have been estimated for a range of speed reductions in realistic weather.It is concluded that the common assumption of cubic speed-power relation can cause a significant error in the estimation of bunker consumption. Simulations in different seasons have revealed that fuel savings due to speed reduction are highly weather dependent. Therefore, a simple way to include the effect of weather in shipping transport models has been proposed.Speed reduction can lead to an increase in the number of ships to fulfill the transport demand. Therefore, the emission reduction potential of speed reduction strategy, after accounting for the additional ships, has been studied. Surprisingly, when the speed is reduced by 30%, fuel savings vary from 2% to 45% depending on ship type, size and weather conditions. Fuel savings further reduce when the auxiliary engines are considered.     

铁路预应力路堤加固技术数值研究

研究目的:铁路预应力路堤在国内外尚属一种新型路基加固法,其受力变形特性暂未得到系统化研究,相关加固设计理论仍处于探索性阶段。因此,有必要通过数值手段了解预应力路堤的工作状态,以掌握其加固性能。鉴于此,借助ABAQUS软件平台构建预应力路堤仿真系统,分析差异化预应力加固参数对路堤变形和承载能力的影响以及预应力加固构件的受力特征。研究结论:(1)路堤本体段坡面较优加固位置为距本体顶面以下0.3倍本体高度处;(2)坡率1∶1的预应力路堤在第1、2排侧压板分别施加50 k Pa、100 k Pa预压荷载时,其变形与承载力均可达传统路堤(坡率1∶1.5)水平,并可通过提升加固标准进一步强化路堤承载性能;(3)当对第1、2、3排侧压板分别施加50 k Pa、100 k Pa、100 k Pa预压荷载时,路堤内部附加围压S11>13.5 k Pa区域大致呈"x"形分布并形成横贯路堤的"预压加固区";(4)侧压板锚固区受力集中且复杂,应注意保障锚固区板体强度;(5)力筋在路堤加载前后的应力变化量与坡面侧向变形特征相关;(6)本研究成果可为铁路预应力路堤的加固设计提供技术指导。     

液压式盾构/TBM主机平移-空推集成装置的研制

研究目的:目前,隧道掘进机平移与空推工艺多采用不同装置分步完成,装置安装耗时费力,严重影响项目施工进程,且国内外没有可同时解决掘进机主机平移和空推的工法或装置。本文研制了一种基于液压的盾构/TBM主机平移-空推集成装置,将平移与空推工序合一,可极大提高工程施工效率,实现荷载600 t盾构/TBM主机连续移位。研究结论:(1)利用液压力驱动液压马达实现装置移位和驱动轮90°转向,实现了平移与空推工艺集成;(2)多轮系和从动轮碟簧设计可优化载荷分布,从动轮选用自润滑推力关节轴承使装置可适应一定倾斜度和不平度,提升装置运行平稳性;(3) 600 t荷载下,利用聚氨酯包敷于钢轮外的复合轮设计减小了轮系与地面接触应力,降低地面要求;(4) ANSYS仿真分析表明承载台架满足强度要求;(5)目前该装置已成功应用于青岛地铁8号线项目,缩短工期20 d,填补了国内外技术空白,应用前景广阔。     

燃气调压器声发射信号特征与流量关系分析

文中提取燃气调压器声发射信号的标准差、峭度这两个时域特征及重心频率、均方根频率这两个频域特征,分析特征与流量的对应关系,使用相关系数进行评价。基于北京某调压站采集的声发射信号及流量数据,实验结果表明,流量与标准差、峭度、重心频率、均方根频率的相关系数分别为0.8192、0.2889、0.7745、0.641。可见标准差、重心频率及均方根频率与流量相关性较强,峭度与流量相关性较弱。